E-mag series electromagnetic flowmeter is used for measuring the volumetric flowrate of conductive liquid and serous fluid in the closed pipe, and is applicable to chemicals, power, mining and metallurgy, petroleum, water supply and drain, paper making, medicine, foods and so on.
a) The measurement is not affected by the change in density, viscosity, temperature, pressure and conductivity of the fluid;
b) There is no part which may obstruct the flow in the measuring tube. No pressure loss, low requirement for the straight pipe;
c) Inside nominal diameter is DN3-DN3000. Multiple choices are available for the lining of sensor and electrode material;
d) The converter adopts new excitation mode, low power consumption, stable zero point, high accuracy. Measurement range reaches 1500: 1;
e) The converter could be integrated or separated from the sensor;
f) The flowmeter has bidirectional measuring system and is installed with three integrators: forward total volume, reverse total volume and total difference; it can display forward flow and reverse flow volume in varied outputs: current, pulse, digital communication, HART;
g) The converter has self-inspection and self-diagnosis function;
h) Explosion-proof type can be used in explosion-proof sites.
Main Technical Parameters
Inside Nominal Diameter：DN3~DN3000
Highest Flow Velocity：15m/s
DN15~ DN600： ±0.3% of the indicating value (flow velocity ≥1m/s);
±3mm/s (flow velocity <1m/s)
±0.5% of the indicating value (flow velocity ≥0.8m/s);±4mm/s (flow velocity <0.8m/s)
Liquid Conductivity: ≥5us/cm
Nominal Pressure: 4.0MPa: DN3- DN700; 1.6MPa:DN15- DN1600; 1.0MPa :DN15- DN2200; 0.6MPa : DN700- DN3000; 6.3MPa: DN15- DN500 ; 10 MPa:For special orders
Lining Material PTFE, Neoprene ,PFA,F46,PU
Electrode Material: Stainless Steel 316L, Hastelloy C, Hastelloy B, Titanium, Tantalum, Platinum-iridium Alloy, Stainless Steel Coated with Tungsten Carbide
DN15- DN3000, Separated Type Sensor with Rubber or Polyurethane Lining
IP65 or IP68;
Other Sensor; Integrated Flowmeter and Separated Flowmeter
Explosion Proof Levels: Normal,Flameproof(EIICT4-CT6)\Intrinsically Safety(ExiaII CT4)
Power Supply: AC 85~265V,45~400Hz
DC19- 40V; Lithium Battery Powered
Operation Buttons: Push Button Type;Magnetic Button Type(Explosion-proof Sites)
Output Signal: Current, Pulse, Alarm
Digital Communication: RS232;RS485;HART;ProfibusDP
Cable Interface: M20*1.5 Electrical Interface
Sensor Connection: Flange; Flange Standard
Selection Of Lining:Polytetrafluoroethylene (F4):1. It is the plastic with most stable chemical properties, and is resistant to boiled hydrochloric acid, sulphuric acid, nitric acid and aqua regia, and also strong alkali and varied organic solvents.
2. Wear resistant performance is lower than polyurethane rubber.
3. Negative pressure resistance is lower than poly neoprene.
Applicable Range: 1.Strong corrosive medium such as concentrated acid and alkali.
Fluorinated Ethylene Propylene (F46):Chemical performance is similar as F4, the negative pressure resistance is better than F4, the price is relatively high.
Applicable range: same as F4
Additional Mesh PFA:Chemical performance is similar as F4, good negative pressure resistance, the price is high.
Applicable range:Water, sewage, weak wearable mud ore pulp.
Poly Neoprene :1. With very good elasticity, high breaking tenacity, good wear resistant performance.
2. Resistant to common low concentration acid and alkali and salt, not resistant to oxidizing medium.
Applicable range:Water, sewage, weak wearable mud ore pulp.
Polyurethane Rubber:1. Extremely strong wear resistant performance.
2. The corrosion resistant performance is relatively low.
Applicable range: Neutral and strong wearable ore pulp, coal pulp and mud.
Selection of electrode
Material Of Electrode Corrosion and wear resistant performanceCorrosion and wear resistant performance
Stainless Steel 316L It is used for weak corrosive medium such as industrial water, domestic water and sewage, applicable to petroleum, chemicals, iron and steel industries and municipal and environmental protection fields.
Hastelloy B Resistant to non-chlorinated acid such as sulphuric acid, phosphoric acid, hydrofluoric acid, organic acid and alkali, non oxidizing salt solution.
Hastelloy C Resistant to non-oxidizing acid and mixing medium such as nitric acid, mixing acid, or chromic acid and sulphuric acid, resistant to oxidizing salt such as Fe+++, Cu++ or other oxidizers such as hypochlorite solution and sea water higher than the normal temperature.
Titanium Resistant to sea water, varied chloride and hypochlorite, oxidizing acid (includes fuming sulphuric acid), organic acid and alkali. Not resistant to relatively pure reducing acid (such as sulphuric acid, hydrochloric acid), but if the acid contains oxidizer (such as nitric acid, Fe+++, Cu++), the corrosion drops greatly.
Tantalum With excellent corrosion resistance, similar as glass. Except hydrofluoric acid, fuming sulphuric acid and alkali, it is nearly resistant to all chemical medium (includes hydrochloric acid at boiling point, nitric acid and <150℃ sulphuric acid). It is not resistant to alkali.
Platinum-iridium Alloy It is nearly resistant to all chemical medium, but it is not applicable to aqua regia and ammonium salt.
Stainless Steel Is Coated With Tungsten Carbide
It is used for without corrosivity and strong wearable medium.
Smart Compact Water Metersmart compact water meter size：DN15-DN600mm Lining：PTFE, Neoprene Electrode：316L, HC/HB, Ti,Tan End connection：Flange connection Characteristics：Special designed for municipal water supply, sewage treatment and irrigation Application: mainly used for urban...
Smart Remote Water Metersmart remote water meter size：DN15-DN3000mm Lining：PTFE, Neoprene Electrode：316L, HC/HB, Ti End connection：Flange connection Characteristics：Special designed for municipal water supply, sewage treatment and irrigation; display output can be separated with...
Insertion Type Electromagnetic Water Meterinsertion type electromagnetic water meter size：DN150-DN3000mm accuracy：±1.5%; ±2.0% electrode：316L, HC/HB End connection：flange, wedding, ball valve Characteristics：easily installation，remote structure, and can open hole in the pipe under pressure without...
Pipeline Electromagnetic Water Flowmeterpipeline electromagnetic water flowmeter size：DN6-DN3000mm accuracy：±0.5% Lining：PTFE, Neoprene（selected according to caliber and applying working conditions），F46、PFA、polyurethanes, etc. Electrode：316L, HC/HB, Ti,Tan, Pt-Ir alloy End connection：Flange...
Threaded Connection Electromagnetic Water Flowmeterthreaded connection electromagnetic water flowmeter size：DN6-DN100 accuracy：±0.5% Lining：PTFE, Neoprene（selected according to caliber and applying working conditions），F46、PFA、polyurethanes, etc. Electrode：316L, HC/HB, Ti,Tan, Pt-Ir alloy End...
Clamped Electromagnetic Water Flowmeterclamped electromagnetic water flowmeter size：DN8-DN100mm lining：PTFE,F46,PFA End connection：clamped Characteristics: No choke parts in the measuring pipe, low request for straight pipe section, pulse/4-20mA output, RS485/RS232 communication, HART protocol,...
Fast-installation Type Electromagnetic Water FlowmeterFast-installation type electromagnetic water flowmeter size：DN10-DN100mm lining：PTFE,F46,PFA electrode：316L, HC/HB,Ti,Tan, Pt-Ir alloy, etc. End connection：clamped characteristics：meet the sanitary requirement of food industry, conveniently and quickly to...
High Pressure Electromagnetic Water Flowmeterhigh pressure electromagnetic water flowmeter size：DN25-DN300mm lining：F46/PFA electrode：316L、HC/HB； End connection：flange, union connection Characteristics：high pressure and temperature resistant, good sealing performance, sensor manufacturing with...
Heat Electromagnetic Wawter FlowmeterHeat electromagnetic water flowmeter Size：DN15-DN1000mm Lining：PTFE, F46,FLS End connection：flange Characteristics：suitable for high temperature media, pulse/4-20mA output, RS485/RS232 communication, HART protocol, empty pipe alarm, upper and lower limit...
Battery Powered Electromagnetic Water FlowmeterBattery powered electromagnetic water flowmeter size：DN10-DN500mm Lining：PTFE, Neoprene（selected according to caliber and applying working conditions), F46, PFA, etc. End connection：flange, insertion type, clamped Characteristics：specialty for water...
GPRS Electromagnetic Water FlowmeterGPRS electromagnetic water flowmeter Size：DN10-DN600mm Lining：PTFE,NEOPRENE End connection:flange Characteristics: specially designed for urban water supply and sewage treatment, which can realize wireless remote transmission and data collection and...
PTFE Lining Electromagnetic Water FlowmeterPTFE lining electromagnetic water flowmeter Size: 10~1600mm accuracy：±0.5% Lining：PTFE, Electrode：316L, HC/HB, Ti,Tan, Pt-Ir alloy End connection：Flange connection Characteristics：converter installed compact/separated with sensor, multiple electrodes are...
Known as one of leading electromagnetic water meter manufacturers and suppliers in China, we also support customized services. All electromagnetic water meter products offered in our factory are made in China. Welcome to get discount and low price instrument in bulk here.